Resolving Incompatible Firmware - Kollmorgen AKD-C01007-MCEC Benutzerhandbuch

AKD Benutzerhandbuch | 21.5.1 Resolving Incompatible Firmware
This error is due to major WorkBench and compiler changes since your last firmware update, causing your
current firmware to be incompatible with your current WorkBench version. These changes improved the
product's ability to handle revision control of the language. However, the improvement also required
changes in how WorkBench and firmware communicate, which caused the incompatibility. The
improvement will allow the editor to recognize the firmware version being used and auto-recognize the
parameters and commands inherent to that firmware. This allows better use of mis-matching WorkBench
and firmware versions in the future.
See VM.PGMCOMPILERVERSION (pg 1) and VM.PGMERRORLIST (pg 1) for more information on
using this new feature.

21.5.1 Resolving Incompatible Firmware

If your firmware is incompatible, we recommend upgrading the AKD BASIC's firmware to version 1.9 or
later in order to take advantage of the new feature and allow seamless integration moving forward.
If the product using AKD BASIC is deep in its product lifecycle, or there are version controls in place that
prevent changes to the machine device firmware, upgrading the firmware may not be suitable. In this
case, downgrading to an older version of WorkBench (version 1.8.0.32358 or earlier) is recommended.
To upgrade to the latest firmware version, please visit the AKD
kollmorgen.com.
To downgrade to an older version of WorkBench, please visit the
kollmorgen.com.
See Also
Nicht unterstützte Firmware (S. 318) | Ungültige Firmware (S. 317)
319 KOLLMORGEN | Mai 2014
It is not necessary to uninstall your current WorkBench version in order to install an older
version. Multiple versions of WorkBench can be installed simultaneously on one PC.
BASICsoftware/firmware tab
AKD BASIC archive tab
on
on