Kollmorgen AKD-C01007-MCEC Benutzerhandbuch Seite 711

AKD Benutzerhandbuch | 24.16.33 FB1.SELECT
Input
Value
46
50
Related Topics
8.2 Rückführung 1 | FB1.IDENTIFIED (S. 680)
Manually sets the type to Hiperface DSL. This value is only supported on model
numbers AKD-xxyyzz-NBxx.This value is only supported for firmware versions 01-09-
00-000 and later.
An external dongle between the two wires from the DSL to the X10 connector is
required to use Hiperface DSL.
This value is reserved and should not be used.
Description
KOLLMORGEN | Mai 2014 711