Kollmorgen AKD-C01007-MCEC Benutzerhandbuch Seite 866

AKD Benutzerhandbuch | 24.25.3 IP.MODE
Sometimes a drive may be configured for an IP Address, and the drive needs to be taken off-line, and
bench tested, or otherwise used outside of its saved IP Settings. If IP.MODE has been set to 1 (using soft-
ware defined static IP), the drive will boot up on an IP Address that may be unreachable with the host com-
puter's settings.
If the IP address prevents communication the IP settings can be reset to default by the following pro-
cedure:
Set both rotary switches to 0
l
Hold down button B1 (top-side of drive) for 5 seconds.
l
The display will flash 0.0.0.0 and then attempt to discover an address by DHCP. Without removing logic
power from the drive, use Workbench to connect to the drive, reconfigure the IP address settings as
desired, and store the values to non-volatile memory.
Related Topics
IP.ADDRESS (S. 861)
IP.GATEWAY (S. 863)
IP.RESET (S. 867)
IP.SUBNET (S. 869)
KOLLMORGEN | Mai 2014 866