Ip.reset - Kollmorgen AKD-C01007-MCEC Benutzerhandbuch

AKD Benutzerhandbuch | 24.25.4 IP.RESET

24.25.4 IP.RESET

General Information
Type
Description
Units
Range
Default
Value
Data Type
See Also
Start Version M_01-04-05-000
Variants Supported
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Fieldbus Information
Fieldbus
Profinet
sercos ® III
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 1672
Description
When this command is issued a new IP will be acquired using IP.MODE (S. 865) to select what method is
used.
Notes:
When issuing this command, it is likely the connection to the drive will be severed, and a new con-
l
nection will need to be made.
IP.RESET will return an error if issued while the drive is enabled. IP.RESET is allowed when drive
l
is disabled, or in dynamic braking mode.
Ensure all values of IP.ADDRESS (S. 861), IP.SUBNET (S. 869), and IP.GATEWAY (S. 863) are
l
configured if using IP.MODE 1
Recovering communications with a drive on an un-reachable IP address
867 KOLLMORGEN | Mai 2014
Command
Implements new IP settings.
N/A
N/A
N/A
N/A
Communicating with the
Drive
Variant Supported
Address Attributes Signed?
2836 Command No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Command No M_01-06-03-000