Fb3.Motorphase - Kollmorgen AKD-C01007-MCEC Benutzerhandbuch

AKD Benutzerhandbuch | 24.18.4 FB3.MOTORPHASE

24.18.4 FB3.MOTORPHASE

General Information
Type
Description
Units
Range
Default Value
Data Type
Start Version
Variants Supported
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Description
This parameter sets the phase offset for commutation of the motor associated with FB3. When multiple
motors are driven by a single AKD, this allows different motor configurations to be saved for each value of
IL.FBSOURCE (S. 827).
When IL.FBSOURCE is set to 2, the value of FB3.MOTORPHASE will overwrite the value of
MOTOR.PHASE (S. 914). Additionally, while IL.FBSOURCE = 2, a write to MOTOR.PHASE will also
overwrite FB3.MOTORPHASE.
Related Topics
Motor (S. 71)
NV Parameter
Sets the motor phase of the motor associated with FB3.
Electrical degrees
0 to 359
0
Integer
M_01-11-04-000
Variant Supported
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
KOLLMORGEN | Mai 2014 736