Kollmorgen AKD-C01007-MCEC Benutzerhandbuch Seite 864

AKD Benutzerhandbuch | 24.25.2 IP.GATEWAY
Set both rotary switches to 0
l
Hold down button B1 (top-side of drive) for 5 seconds.
l
The display will flash 0.0.0.0 and then attempt to discover an address by DHCP. Without removing logic
power from the drive, use Workbench to connect to the drive, reconfigure the IP address settings as
desired, and store the values to non-volatile memory.
Related Topics
IP.ADDRESS (S. 861) | IP.RESET (S. 867) | IP.SUBNET (S. 869) | IP.MODE (S. 865)
KOLLMORGEN | Mai 2014 864