Fb1.Bissbits - Kollmorgen AKD-C01007-MCEC Benutzerhandbuch

AKD Benutzerhandbuch | 24.16.1 FB1.BISSBITS

24.16.1 FB1.BISSBITS

General Information
Type
Description
Units
Range
Default
Value
Data Type
See Also
Start Ver-
sion
Variants Supported
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Fieldbus Information
Fieldbus
Profinet
sercos ® III
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 280
Description
FB1.BISSBITS specifies the number of BiSS sensor (position) bits for the BiSS Mode C encoder in use.
Typically the value is either 26 or 32 for a BiSS Mode C Renishaw encoder. The required value for this
parameter is provided by the feedback device manufacturer for the particular device being used.
Related Topics
Rückführung 1 (S. 76)
NV Parameter
Specifies the number of Biss Sensor (Position) Bits for the BiSS Mode C
encoder in use.
bits
0 to 64 bits
32 bits
Integer
FB1.SELECT (S. 709), FB1.IDENTIFIED (S. 680)
M_01-01-00-100 and M_01-01-03-000
Variant Supported
Address Attributes Signed?
Byte
2140 No
2 Octets
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
8 bit No M_01-03-00-000
KOLLMORGEN | Mai 2014 669