Drv.nvsave - Kollmorgen AKD-C01007-MCEC Benutzerhandbuch

AKD Benutzerhandbuch | 24.13.54 DRV.NVSAVE

24.13.54 DRV.NVSAVE

General Information
Type
Description
Units
Range
Default
Value
Data Type
Start Version M_01-00-00-000
Variants Supported
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Fieldbus Information
Fieldbus
EtherCAT COE and CAN-
open
Fieldbus
Profinet
sercos ® III
Fieldbus Index/Subindex Is 64 bit? Attributes Signed?
Modbus 938
Description
DRV.NVSAVE saves the current drive parameter values from the RAM to the NV memory.
The drive parameters that were saved to the NV are read from the NV on the next drive boot, causing the
values to be automatically set to the saved values on every drive boot.
Executing DRV.RSTVAR does not modify the values of the NV, but instead sets the drive values in RAM
to their defaults.
Related Topics
DRV.RSTVAR (S. 643)
Command
Saves the drive parameters from the RAM to the NV mem-
ory.
N/A
N/A
N/A
N/A
Variant Supported
Index/Subindex Object Start Version
1010h/1
35EBh/0
Address Attributes Signed?
2469 Command No
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
M_01-00-00-000
Command No
KOLLMORGEN | Mai 2014 638