Drv.crashdump - Kollmorgen AKD Series Benutzerhandbuch

AKD Benutzerhandbuch | 25.13.9 DRV.CRASHDUMP

25.13.9 DRV.CRASHDUMP

General Information
Type
Description
Units
Range
Default
Value
Data Type
See Also
Start Version M_01-00-00-000
Variants Supported
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
Description
Drives rarely crash, but if a crash occurs, information that can help diagnose the cause of a crash is saved
to the nonvolatile (NV) memory within the drive. After the drive is restarted, you can use the DRV.CRAS-
HDUMP command to retrieve this diagnostic information, which can be emailed to Kollmorgen for further
support.
If the drive crashes (display flashes an F and three bars), it saves the diagnostic information to a specific
block of the drive NV memory. The DRV.CRASHDUMP command then prints the diagnostic information
from this NV memory block. Subsequent crash conditions will overwrite the NV memory block. Since the
NV memory block is overwritten, but never erased, the DRV.CRASHDUMP command always shows the
diagnostic information for the most recent crash.
Command
Retrieves diagnostic information after the drive
crashes.
N/A
N/A
N/A
N/A
N/A
Variant Supported
N/A
√
N/A
KOLLMORGEN | Mai 2013 524