Unit.pout - Kollmorgen AKD Series Benutzerhandbuch

AKD Benutzerhandbuch | 25.39.6 UNIT.POUT

25.39.6 UNIT.POUT

General Information
Type
Description
Units
Range
Default
Value
Data Type
See Also
Start Version M_01-00-00-000
Variants Supported
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
Fieldbus Information
Fieldbus
EtherCAT COE and CAN-
open
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 784
Description
UNIT.POUT is used with UNIT.PIN (s: 935) to set application specific units in UNIT.POUT. This param-
eter is used as follows in the drive unit conversion:
Related Topics
Auswählen von Einheiten für Ihre Anwendung (s: 96)
NV Parameter
Sets gear out for the unit con-
version.
User units.
0 to 4,294,967,295
20
Integer
UNIT.PLINEAR (s: 936)
Variant
Index/Subindex Object Start Version
35CBh/0
6092h/2
No
For position, this parameter sets the units as [Benutzerspezifische Ein-
l
heiten (s: 97)]/rev.
For velocity, this parameter sets the units as [Benutzerspezifische Ein-
l
heiten (s: 97)]/s.
For acceleration/deceleration, this parameter sets the units as [Benut-
l
zerspezifische Einheiten (s: 97)]/s
Supported
√
√
√
M_01-00-00-000
32 bit No M_01-03-00-000
2
.
KOLLMORGEN | Mai 2013 937