Gear.move - Kollmorgen AKD Series Benutzerhandbuch

AKD Benutzerhandbuch | 25.20.5 GEAR.MOVE

25.20.5 GEAR.MOVE

General Information
Type
Description
Units
Range
Default
Value
Data Type
See Also
Start Version M_01-00-00-000
Variants Supported
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
Fieldbus Information
Fieldbus Index/Subindex
Modbus 378
Description
The command GEAR.MOVE starts the electronic gearing procedure according to the selected electronic
gearing mode. The electronic gearing process can be stopped using the DRV.STOP (s: 581) command.
Related Topics
Elektronisches Getriebe (s: 119)
Command
Starts the electronic gearing; active in opmode 2 (position)
only.
N/A
N/A
N/A
N/A
N/A
Variant Supported
Is 64
Attributes Signed?
bit?
No Command No
N/A
√
√
Object Start Ver-
sion
M_01-03-00-000
KOLLMORGEN | Mai 2013 672