Fbus.protection - Kollmorgen AKD Series Benutzerhandbuch

AKD Benutzerhandbuch | 25.19.4 FBUS.PROTECTION

25.19.4 FBUS.PROTECTION

General Information
Type
Description
Units
Range
Default
Value
Data Type
Start Ver-
sion
Variants Supported
AKD SynqNet
AKD EtherNet/IP
AKD CANopen
AKD EtherCAT
AKD Profinet
Fieldbus Information
EtherCAT COE and CANopen 3498h/0
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 1742
Description
When an AKD is a slave node on a fieldbus (for example an AKD is connected to an EtherCAT master)
and WorkBench is simultaneously connected to an AKD via a service channel, then you have several
options on how you would like the AKD to respond to commands from each of the channels.
When the fieldbus is operational the AKD uses the FBUS.PROTECTION parameter to allow the user to
select how commands from WorkBench, or any other device sending commands to the drive through a
R/W Parameter
Controls which parameters are blocked from being accessed through telnet
while a fieldbus is operational.
N/A
0 to 1
0
Integer
M_01-08-00-000
Variant
Fieldbus Index/Subindex Object Start Version
No
Supported
No
No
Yes
Yes
No
M_01-08-00-000
8 bit No M_01-08-00-000
KOLLMORGEN | Mai 2013 655