AKD Benutzerhandbuch | 25.13.60 DRV.TEMPERATURES
25.13.60 DRV.TEMPERATURES
General Information
Type
Description
Units
Range
Default
Value
Data Type
See Also
Start Version M_01-00-00-000
Variants Supported
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
Fieldbus Information
Fieldbus
EtherCAT COE and CAN-
open
Description
DRV.TEMPERATURES reads the temperature in different parts of the drive (power and control boards).
The temperature is read from temperature sensors located in the drive.
Example
Below is an example of the output for this command :
Control Temperature: 39 °C
Power1 Temperature: 31 °C
Power2 Temperature: Sensor does not exist.
Power3 Temperature: Sensor does not exist.
R/O Parameter
Reads the temperature of drive com-
ponents.
°C
55 to 125 °C
N/A
String
N/A
Variant
Supported
Index/Subindex Object Start Version
3610h/0
3611h/0
N/A
√
N/A
M_01-00-00-000
KOLLMORGEN | Mai 2013
582