Din1.Param To Din7.Param - Kollmorgen AKD Series Benutzerhandbuch

AKD Benutzerhandbuch | 25.10.8 DIN1.PARAM TO DIN7.PARAM

25.10.8 DIN1.PARAM TO DIN7.PARAM

General Information
Type
Description
Units
Range
Default
Value
Data Type
See Also
Start Version M_01-00-00-000
Variants Supported
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
Fieldbus Information
Fieldbus
Modbus
Description
This parameter sets a value that is used as an extra parameter for digital inputs nodes.
Example
The digital input mode "Start motion task" is used to start a motion task. This mode uses an extra param-
eter as the ID of the motion task to be started.
Range
DINx.PARAM is used for various Digital Input modes. This causes the parameter's range to change
based on the current Digital Input mode selected with the corresponding DINx.MODE
Listed below are the possible ranges for each Digital input mode.
If an input mode is not listed, then the default range above is used.
Input
Mode
2
R/W Parameter
Sets a value used as an extra parameter for digital inputs
nodes.
N/A
-9,223,372,036,854,775,000 to +9,223,372,036,854,775,000
Note: Varies based on DINx.MODE. See below.
0
Float
N/A
Variant
Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
124 DIN1.PARAM
134 DIN2.PARAM
144 DIN3.PARAM
154 DIN4.PARAM Yes
164 DIN5.PARAM
174 DIN6.PARAM
184 DIN7.PARAM
Min Max
0 128
Supported
N/A
√
√
64 bit Yes
Notes
M_01-03-00-000
KOLLMORGEN | Mai 2013 487