Siemens SINUMERIK 840D sl Handbuch Seite 394

Vorschau ausblenden Andere Handbücher für SINUMERIK 840D sl:

Inhaltsverzeichnis

M3: Achskopplungen

7.4 Elektronisches Getriebe (EG)

Maschinendaten

Auszug aus den MD:

; *************** Kanal 1

; *************** Achse 1, "X"

$MC_AXCONF_GEOAX_NAME_TAB[0] = "X"

$MC_AXCONF_CHANAX_NAME_TAB[0] = "X"

$MC_AXCONF_MACHAX_USED[0] = 1

$MN_AXCONF_MACHAX_NAME_TAB[0] = "X1"

$MA_SPIND_ASSIGN_TO_MACHAX[AX1] = 0

$MA_IS_ROT_AX[AX1] = FALSE

; *************** Achse 2, "Y"

$MC_AXCONF_GEOAX_NAME_TAB[1] = "Y"

$MC_AXCONF_CHANAX_NAME_TAB[1] = "Y"

$MC_AXCONF_MACHAX_USED[1] = 2

$MN_AXCONF_MACHAX_NAME_TAB[1] = "Y1"

$MA_SPIND_ASSIGN_TO_MACHAX[AX2] = 0

$MA_IS_ROT_AX[AX2] = FALSE

; *************** Achse 3, "Z"

$MC_AXCONF_GEOAX_NAME_TAB[2] = "Z"

$MC_AXCONF_CHANAX_NAME_TAB[2] = "Z"

$MC_AXCONF_MACHAX_USED[2] = 3

$MN_AXCONF_MACHAX_NAME_TAB[2] = "Z1"

$MA_SPIND_ASSIGN_TO_MACHAX[AX3] = 0

$MA_IS_ROT_AX[AX3] = FALSE

; *************** Achse 4, "A"

$MC_AXCONF_CHANAX_NAME_TAB[3] = "A"

$MC_AXCONF_MACHAX_USED[3] = 4

$MN_AXCONF_MACHAX_NAME_TAB[3] = "A1"

$MA_SPIND_ASSIGN_TO_MACHAX[AX4] = 0

$MA_IS_ROT_AX[AX4] = TRUE

$MA_ROT_IS_MODULO[AX4] = TRUE

Funktionshandbuch, 03/2013, 6FC5397-2BP40-3AA1

Sonderfunktionen

Sinumerik 828d