Kollmorgen AKD-N-DB Benutzerhandbuch Seite 396

AKD Benutzerhandbuch | 25.1.2 Summary of Parameters and Commands
Parameter or Command
FBUS.SYNCDIST (➜ S. 832)
FBUS.SYNCWND (➜ S. 833)
FBUS.TYPE (➜ S. 834)
Gearing (GEAR)
GEAR.ACCMAX (➜ S. 837)
GEAR.DECMAX (➜ S. 839)
GEAR.IN (➜ S. 841)
GEAR.MODE (➜ S. 843)
GEAR.MOVE (➜ S. 846)
GEAR.OUT (➜ S. 847)
GEAR.VMAX (➜ S. 849)
WorkBench (GUI) Parameters
GUI.DISPLAY (➜ S. 852)
GUI.DISPLAYS (➜ S. 853)
GUI.PARAM01 (➜ S. 854)
GUI.PARAM02 (➜ S. 855)
GUI.PARAM03 (➜ S. 856)
GUI.PARAM04 (➜ S. 857)
GUI.PARAM05 (➜ S. 858)
GUI.PARAM06 (➜ S. 859)
GUI.PARAM07 (➜ S. 860)
GUI.PARAM08 (➜ S. 861)
GUI.PARAM09 (➜ S. 862)
GUI.PARAM10 (➜ S. 863)
Homing (HOME)
HOME.ACC (➜ S. 865)
HOME.AUTOMOVE (➜ S. 867)
HOME.DEC (➜ S. 869)
HOME.DIR (➜ S. 871)
396 KOLLMORGEN | Dezember 2014
Type Description
NV Sets time target for synchronization.
NV Sets symmetrically arranged window around
the desired sync distance.
R/O Shows the active fieldbus type.
R/W Sets the maximum allowed acceleration value;
active in opmode 2 (position) only.
R/W Sets the maximum allowed deceleration value;
active in opmode 2 (position) only.
R/W Sets the denominator of the electronic gearing
ratio; active in opmode 2 (position) only.
R/W Selects electronic gearing mode; active in
opmode 2 (position) only.
Command Starts the electronic gearing; active in opmode
2 (position) only.
R/W Sets the numerator of the electronic gearing
ratio; active in opmode 2 (position) only.
R/W Reads the maximum allowed velocity value;
active in opmode 2 (position) only.
R/O Reads drive display data.
Reads drive display data.
R/O
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
NV Used by the GUI to store data.
R/W Sets homing acceleration; active in opmode 2
(position) only.
R/W Sets homing auto move flag.
R/W Sets homing deceleration; active in opmode 2
(position) only.
Sets homing direction; active in opmode 2
NV
(position) only.