Kollmorgen AKD-N-DB Benutzerhandbuch Seite 576

AKD Benutzerhandbuch | 25.11.10 DIN9.STATE to DIN11.STATE
This parameter allows the user to see the actual level of the input signal, when the IO is set to input
mode. Parameter value is 0 if signal is low and 1 if signal is high. DIOx.INV can affect the value in this
register.
This parameter can be read at any time. The value is only guaranteed to correspond to the output on
the X9 connector when DRV.EMUEMODE is set to 10 and the DIOX.DIR is 0.
Related Topics
DIO9.DIR to DIO11.DIR (➜ S. 584)
DIO9.INV to DIO11.INV (➜ S. 582)
DRV.EMUEMODE (➜ S. 649)
576 KOLLMORGEN | Dezember 2014