Kollmorgen AKD-N-DB Benutzerhandbuch Seite 821

AKD Benutzerhandbuch | 25.20.1 FBUS.PARAM1 TO FBUS.PARAM10
Bit 5 = 0: EtherCAT: The setting of the rotary switches define the station alias
l
address. If the setting is 0, FBUS.PARAM03 can be used.
Bit 6 = 1: Bit 0 of the parameter MT.CNTL (object 35D9 sub 0) can be accessed.
l
Bit 6 = 0: Bit 0 of the parameter MT.CNTL (object 35D9 sub 0) is exclusively
l
used for DS402 control word.
Bit 7: Reserved
l
Bit 8 = 1: DS402-state switched on, power stage disabled.
l
Bit 8 = 0: DS402-state switched on, power stage enabled.
l
Bit 11 = 1 No emergency messages over CANopen are triggered when a drive
l
warning occurs.
KOLLMORGEN | Dezember 2014 821