Kollmorgen AKD-N-DB Benutzerhandbuch Seite 985

AKD Benutzerhandbuch | 25.29.2 MOTOR.BRAKE
The MOTOR.BRAKE parameter notifies the firmware whether a brake exists or not. It does not apply
or release the brake. If a brake is found to be present, the firmware considers hardware indications
regarding the brake circuits (such as open circuit or short circuit). If a brake does not exist, then the
firmware ignores the hardware indications since they are irrelevant.
Value Status
0 Motor brake does not exist.
1 Motor brake exists and brake hardware circuitry checks are ena-
bled.
Enabling the MOTOR.BRAKE (value set to 1) when no motor brake exists creates a fault.
The motor brake is polled every 16 ms.
Related Topics
9.1 Motor
Wenn MOTOR.AUTOSET=1 ist, ist dieser Parameter automatisch für Kollmorgen
Motoren konfiguriert.
KOLLMORGEN | Dezember 2014 985