Fbus.remote - Kollmorgen AKD-N-DB Benutzerhandbuch

AKD Benutzerhandbuch | 25.20.5 FBUS.REMOTE

25.20.5 FBUS.REMOTE

General Information
Type
Description
Units
Range
Default Value 0
Data Type
See Also
Start Version M_01-05-06-000
Variants Supported
Variant
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Description
DS402 (CAN/EtherCAT):
With this parameter the bit 9 (remote) of the DS402-status word can be set directly via Telnet to show
the DS402-master-system that the control is removed. The master has to react on that.
R/W Parameter
Changes or shows the control of the drive (fieldbus mas-
ter/telnet)
N/A
0 to 1
U8
Feldbus-Handbücher (➜ S. 342)PL.FBSOURCE (➜ S. 1114)
Supported
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
No
KOLLMORGEN | Dezember 2014 827