Fault564.Action, Fault565.Action - Kollmorgen AKD-N-DB Benutzerhandbuch

AKD Benutzerhandbuch | 25.16.3 FAULT564.ACTION, FAULT565.ACTION

25.16.3 FAULT564.ACTION, FAULT565.ACTION

General Information
Type
Description
Units
Range
Default Value 4
Data Type
Start Version M_01-09-10-000
Variants Supported
Variant
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Fieldbus Information
Fieldbus Address Attributes Signed?
Profinet 2140
sercos ® III
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus 280
Description
These parameters set the action the AKD-C uses when the node count on string 1 (F564) or string 2
(F565) decreases. The supervision of nodes begins as soon as the nodes are powered (CPS.ACTIVE
>= 3).
Value Action
0 Disable amplifier
1 Ignore
4 Generate warning
R/W Parameter
Gets/Sets the fault action for either fault 564 or 565 in the AKD-
C.
N/A
0, 1, 4
Integer
Supported
Yes
Byte No
2 Octets
No 8 bit
No
No
No
No
No
No
No
No
No
No
M_01-03-00-000
No
KOLLMORGEN | Dezember 2014 733