Kollmorgen AKD-N-DB Benutzerhandbuch Seite 533

AKD Benutzerhandbuch | 25.8.9 CMPx.SETPOINT
Variant
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Description
Use this keyword to set the position value for a Compare setpoint. This position value will be com-
pared against a Compare source (CMPx.SOURCE (➜ S. 534)). If they match, an output pulse is gene-
rated. A setpoint also requires a width (CMPx.WIDTH (➜ S. 539)) and width type
(CMPx.WIDTHTYPE (➜ S. 541)).
A setpoint must be armed (CMPx.ARM (➜ S. 518)) before it is active. If a setpoints value, width, or
width type are changed after it has been armed, that setpoint will be automatically disarmed.
Example
The following example sets the value of setpoint 1 to one billion for CMP1.
-->CMP1.SETPOINT 1 1000000000
Related Topics
Komparatoren (Vergleicher) (➜ S. 129)
Supported
Yes
Yes
No
No
KOLLMORGEN | Dezember 2014 533