Kollmorgen AKD-N-DB Benutzerhandbuch Seite 743

AKD Benutzerhandbuch | 25.17.5 FB1.FAULTS
Hiperface DSL Strings
1013: Error 3 in absolute position with multiple rotations
1020: Power on self-test done (only safety-version)
1021: Warning safety-parameter: error has been rectified (only safety-version)
1022: Error safety-parameter: error could not been rectified (only safety-version)
1023: Error calibration-data
1024: Internal communication error 1
1025: Internal communication error 2
1026: Internal general error
1030: Critical temperature
1031: Critical LED current
1032: Critical supply voltage
1033: Critical speed
1035: Critical overrun
1036: Internal checking error
1040: Invalid argument input during resources access
1041: Resources access refused due to incorrect access level
1042: Internal error on resources access
1043: Error on access to user file
1100: No link
1101: No sync
1102: Fault in short command
1103: No FPGA support
1105: Long command read timeout
1106: Long command poll timeout
1107: Spinlock timeout
1110: Long command failure (Refer to FB1.DIAG (➜ S. 739) if Fault 1110 is returned)
1111: Resource ID timeout
SFD3 Strings
2100: Receive CRC Fault
2102: Communications Fault
Related Topics
FB1.DIAG (➜ S. 739)
KOLLMORGEN | Dezember 2014 743