Kollmorgen AKD-N-DB Benutzerhandbuch Seite 668

AKD Benutzerhandbuch | 25.14.33 DRV.FAULT1 to DRV.FAULT10
If DRV.FAULT1 value is 0, then the drive does not have any faults.
o
Only active faults are shown. This is not a fault history.
o
These registers are an alternative to the string type parameter DRV.FAULTS (➜ S. 669), so
o
that fieldbusses and AKD BASIC users have easier access to the details of the faults in the
drive.
Warnings are not shown in the registers, only faults.
o
Related Topics
Modbus (➜ S. 343) |DRV.ACTIVE (➜ S. 613) | DRV.WARNING1 to DRV.WARNING3 (➜ S. 716)
668 KOLLMORGEN | Dezember 2014