Kollmorgen AKD-N-DB Benutzerhandbuch Seite 659

AKD Benutzerhandbuch | 25.14.27 DRV.EMUEZOFFSET
When the EEO is configured to generate an absolute index pulse (DRV.EMUEMODE is 2, 7 or 9) this
parameter and DRV.EMUEZOFFSET define the location of the Z pulse. DRV.EMUEMTURN is used
to define which turn of the position range the Z pulse is located and DRV.EMUEZOFFSET is used to
define the position of the Z pulse within one revolution.
Note: If you are using multi-turn or single tune absolute feedback devices the Z pulse from generated
by the EEO will always be aligned with the same mechanical position of the of the primary feedback
position. If you are using an incremental feedback device then the origin of the primary feedback is not
at the same mechanical position each time the drive powers up.
Related Topics
DRV.EMUEMODE (➜ S. 649), DRV.EMUEMTURN (➜ S. 652)
KOLLMORGEN | Dezember 2014 659