Kollmorgen AKD-N-DB Benutzerhandbuch Seite 571

AKD Benutzerhandbuch | 25.11.8 DIN1.PARAM TO DIN7.PARAM
Paramter
DIN1.PARAM Profinet
DIN2.PARAM Profinet
DIN3.PARAM Profinet
DIN4.PARAM Profinet
DIN5.PARAM Profinet
DIN6.PARAM Profinet
DIN7.PARAM Profinet
Fieldbus Index/Subindex
Modbus 124
134
144
154
164
174
184
Description
This parameter sets a value that is used as an extra parameter for digital inputs nodes.
Example
The digital input mode "Start motion task" is used to start a motion task. This mode uses an extra para-
meter as the ID of the motion task to be started.
Range
DINx.PARAM is used for various Digital Input modes. This causes the parameter's range to change
based on the current Digital Input mode selected with the corresponding DINx.MODE
Listed below are the possible ranges for each Digital input mode.
If an input mode is not listed, then the default range above is used.
Input Min
Mode
2 0
Fieldbus Address Attributes Signed?
2062 DWord
sercos ® III
8 Octets
2067 DWord
sercos ® III
8 Octets
2072 DWord
sercos ® III
8 Octets
2077 DWord
sercos ® III
8 Octets
2082 DWord
sercos ® III
8 Octets
2087 DWord
sercos ® III
8 Octets
2092 DWord
sercos ® III
8 Octets
Is 64 bit? Attributes Signed? Object Start Version
DIN1.PARAM Yes
DIN2.PARAM
DIN3.PARAM
DIN4.PARAM
DIN5.PARAM
DIN6.PARAM
DIN7.PARAM
AKD-N only supports DIN1 to DIN3.
Max Notes
128
Yes
64 bit Yes M_01-03-00-000
KOLLMORGEN | Dezember 2014 571