AKD Benutzerhandbuch | 25.6.2 BODE.FREQ
25.6.2 BODE.FREQ
General Information
Type
Description
Units
Range
Default Value 0 Hz
Data Type
Start Version M_01-00-00-000
Variants Supported
Variant
AKD Base
AKD with Position Indexer
AKD EtherCAT
AKD CANopen
AKD BASIC
AKD SynqNet
AKD EtherNet/IP
AKD Profinet
AKD sercos ® III
AKD-N
AKD-C
Fieldbus Information
Fieldbus
Profinet
sercos ® III
Fieldbus Index/Subindex Is 64 bit? Attributes Signed? Object Start Version
Modbus
40
Description
BODE.FREQ sets the frequency of the sine excitation source in Hz. The sine excitation source is
used to take frequency response measurements of a system.
Example
Setting up a sine excitation source of 0.2 A at 50 Hz:
-->BODE.INJECTPOINT 1
-->BODE.IAMP 0.2
-->BODE.FREQ 50.0
462
KOLLMORGEN | Dezember 2014
R/W Parameter
Sets the frequency of the sine excitation
source.
Hz
0 to 8,000 Hz
Float
Supported
Address Attributes Signed?
2020
DWord
No
4 Octets
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
M_01-03-00-000
32 bit
No