AKD Benutzerhandbuch | 25.33.2 PLS.MODE
Example
Bit
Behavior
Value
Bit 0
PLS 1 is monitored continuously.
= 0
Bit 0
PLS 1 is monitored until it is triggered once (single-shot method). The PLS observation can
= 1
be re-armed using the PLS.RESET command.
Bit 7
PLS 8 is monitored continuously.
= 0
Bit 7
PLS 8 is monitored until it is triggered once (single-shot method). The PLS observation can
= 1
be re-armed using the PLS.RESET command.
Related Topics
Programmierbarer Endschalter (➜ S. 131)
KOLLMORGEN | Dezember 2014
1137