49
Aufstellen und
Bedienungshinweise
i
Hinzufügen und Verschieben von
i
Landmarken im 3D-Oberflächenmodell
Landmarken können in der 3D-Ansicht hinzugefügt
eine gelbe halbtransparente Kugel mit einem
Um Landmarken zu verschieben, wird mit der
Landmarke wird bei der Auswahl gelb.
gezogen werden.
Landmarken können in der 3D-Ansicht nur auf
i
der Oberfläche des Patientenmodells verschoben
werden.
3D-Ansicht besteht darin, dass die anzutastenden
Punkte nicht in der Luft oder im Inneren des
Patienten liegen.
Installation and operating
instructions
Adding and moving landmarks on
the 3D surface model
Landmarks can be added to the 3D view. To do so,
click on the surface of the model using the mouse.
A yellow semi-transparent ball appears with a small
black dot in the middle.
To move landmarks, touch the landmark using the
mouse. The landmark turns yellow upon selection.
The landmark can then be moved to the desired
position by holding the mouse button down.
Landmarks can only be moved on the surface of
the patient model in the 3D view.
The advantage of positioning the markers in the
3D view is that the points to be touched are not
located in the air or within the patient.