Herunterladen Inhalt Inhalt Diese Seite drucken

Risikoindex; Wegpunkt-Navigation - Storz NAV1 pico Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für NAV1 pico:
Inhaltsverzeichnis

Werbung

91
Aufstellen und Bedienungs-
hinweise

Risikoindex

1
HINWEIS: Der Risikoindex ist lediglich
eine zusätzliche Hilfe. Achten Sie bei
der Navigation immer sorgfältig auf die
gegebenen Umstände, und berücksichtigen
Sie die erfassten Bilddaten.
3
WARNUNG: Der Risikoindex wird nur an-
gezeigt, wenn die Risikostruktur präoperativ
geplant wurde.
Das Anzeigefeld für den Risikoindex wird oben
rechts in der rekonstruierten 3D-Modellansicht
angezeigt, wenn sich das navigierte Instrument der
geplanten Risikostruktur nähert. Der Risikoindex
zeigt den tatsächlichen Abstand zwischen der Spit-
ze des navigierten Instruments und der geplanten
Risikostruktur an.
Der Wert des Risikoindex geht auf Null, wenn das
navigierte Instrument mit der geplanten Risikostruk-
tur kollidiert.
Ebenso wie bei der Farbkodierung für die navigier-
ten Instrumente ändert sich die Hintergrundfarbe
des Anzeigefelds für den Risikoindex wie folgt:
Abstand zur Risikostruktur hat
Risikostruktur gelangt
kostruktur kollidiert.
3
WARNUNG: Ein roter oder orangefarbener
Risikoindex bedeutet eine mögliche Gefahr
für den Patienten.

Wegpunkt-Navigation

Die Wegpunkt-Navigation beinhaltet eine Reihe
zusätzlicher Funktionen, die die Standard-Navigati-
on nicht bietet. Der Navigationsvorgang selbst kann
wie gewohnt durchgeführt werden.
Eine Sonderfunktion besteht darin, dass alle bisher
unterstützten Instrumente benutzt werden können.
Wegpunkte können mit allen Instrumenten berührt
werden, und die zugewiesenen Funktionen können
aktiviert werden.
Wenn erstmals ein zuvor festgelegter Wegpunkt
erreicht wird, ertönt ein akustisches Signal. Gleich-
zeitig werden die festgelegten Aktionen ausgeführt.
Installation and operating
instructions
Risk index
1
NOTE: The risk index is only an additional
aid. When navigating always pay close
attention to the prevailing circumstances
and take the acquired image data into
account.
3
WARNING: The risk index will only be
displayed if the risk structure has been
planned preoperatively.
The risk index display field appears in the upper
right corner of the 3D reconstructed model view as
the navigated instrument approaches the planned
risk structure. The risk index displays the actual
distance between the tip of the navigated instru-
ment and the planned risk structure.
The risk index value falls to zero when the navi-
gated instrument collides with the planned risk
structure.
In the same way as the color coding for the navi-
gated instruments, the risk index will change the
background color of the display field to:
green when the instrument is at a sufficient
distance to the risk structure
orange when the instrument enters the vicinity
of the risk structure
-
red when the instrument collides with the plann -
ned risk structure.
3
WARNING: A red or orange risk index
represents potential danger for the patient.
Waypoint navigation
Waypoint navigation includes a number of addi-
tional functions that are not offered by standard
navigation. The navigation process itself can be
performed in the usual way.
One particular feature is that all of the instruments
which have been supported so far can be used.
Waypoints can be touched with all of the instru-
ments and the assigned functions can be initiated.
The first time a previously defined waypoint is
reached, an audible tone is emitted. At the same
time, the defined actions are performed.
1
:
3
3
:
-
-
-
-
-
-
-
-
-
-

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

40 8000 01

Inhaltsverzeichnis