Inhaltsverzeichnis
Werbung
133
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Guidance and manufacturer's declaration – electromagnetic immunity
40 8100
40 8200 20 should ensure that they are used in such an environment.
Immunity tests
EN/IEC 60601 test level
Electrostatic discharge (ESD)
Rapid transient electric interferences/
lines
Surges
<5 % U
(>95 % dip in U
for 1/2 cycle
40 % U
(60 % dip in U
Voltage dips, short interruptions and
for 5 cycles
fluctuations of the supply voltage
70 % U
(30 % dip in U
for 25 cycles
<5 % U
(>95 % dip in U
* Note: U
is the mains alternating voltage prior to application of the test level.
T
Appendix
Electromagnetic Compatibility (EMC)
Information
Table 2
40 8100
Compliance level
Complies
Complies
lines
Complies
Complies
<5 % U
*
*
T
T
(>95 % dip in U
)
)
T
T
for 1/2 cycle
Complies
40 % U
T
T
)
(60 % dip in U
)
T
T
for 5 cycles
Complies
T
70 % U
)
T
T
(30 % dip in U
)
T
for 25 cycles
Complies
T
)
<5 % U
T
T
(>95 % dip in U
)
T
Complies
40 8200 20 are intended for use in the electromagnetic
Electromagnetic environment – guidance
Floors should be wood, concrete or ceramic tile. If floors
are covered with synthetic material, the relative humidity
should be at least 30 %.
or hospital environment. If image distortion occurs it may
be necessary to further filter the power quality by using an
AC line filter.
or hospital environment.
or hospital environment.
If the user of the equipment or system requires continued
operation even during interruptions to the power supply,
it is recommended that the equipment or system be
powered from an uninterruptible power supply or a battery.
The magnetic fields at the mains frequency should be at
the values typical of commercial or hospital environments.
Werbung
Inhaltsverzeichnis
