Herunterladen Inhalt Inhalt Diese Seite drucken

Anschließen Von Usb-Peripheriegeräten; Anschließen Der Computermaus - Storz NAV1 pico Gebrauchsanweisung

Vorschau ausblenden Andere Handbücher für NAV1 pico:
Inhaltsverzeichnis

Werbung

30
Aufstellen und
Bedienungshinweise
1
HINWEIS: Der Audiostecker muss in die
Buchse des NAV1-Moduls passen. Stecker
auf keinen Fall mit Gewalt in Buchsen
stecken.
Anschließen von USB-
Peripheriegeräten
4 USB-Anschlüsse 8.
Technische Angaben:
– Anschlusstyp: USB-Anschluss vom Typ A
– Eigenschaften: USB 2.0 mit bis zu 480 MB/s
Übertragungsrate
An die USB-Anschlüsse dürfen keine Geräte
angeschlossen werden, die nicht mit dem NAV1-
System kompatibel sind. Stellen Sie sicher, dass
die USB-Geräte und alle Gerätekombinationen
die Richtlinien, gesetzlichen Bestimmungen und
3
WARNUNG: Das NAV1-Modul darf nur an
Netzwerke angeschlossen werden, die die
Richtlinien, gesetzlichen Bestimmungen
und Normen für Medizinprodukte erfüllen.
3
WARNUNG: Der USB-Stecker muss in die
Buchse des NAV1-Moduls passen. Stecker
auf keinen Fall mit Gewalt in Buchsen
stecken.
Anschließen der Computermaus
Schließen Sie die Computermaus an den USB-
Anschluss 6
an, sodass das USB-Zeichen des Steckers der
Computermaus nach oben zeigt.
Installation and operating
instructions
1
NOTE:
the socket on the NAV1 module. Never use
force to insert the connector into the socket.
Connecting USB peripherals
4 USB ports 8 are located on the rear of the NAV1
module.
Specifications:
– Connection type: USB Type A port
– Properties: USB 2.0 with up to 480 Mbps
transfer rate
Devices which are not rated as compatible with the
NAV1 system must not be connected via the USB
ports. Ensure that the USB peripherals, as well
as all of the device combinations comply with the
guidelines, laws and norms for medical devices.
3
WARNING: The NAV1 module may only be
connected to networks which comply with
the guidelines, laws and norms for medical
devices.
3
WARNING:
into the socket on the NAV1 module. Never
use force to insert the connector into the
socket.
Connecting the computer mouse
Connect the computer mouse to the USB port 6
on the front of the NAV1 module so that the USB
sign on the computer mouse connector points
upwards.
1
8.
3
3
USB 6

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

40 8000 01

Inhaltsverzeichnis