Inhaltsverzeichnis
Werbung
131
Anhang
Hinweise zur elektromagnetischen
Verträglichkeit (EMV)
Recommended separation distances between portable and mobile RF communications equipment and
The
KARL STORZ NAV1™ pico system 40 8000 01
The customer or user of the unit can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF
communications equipment (transmitters) and the unit as recommended below, according to the maximum output power of the communications equipment.
Rated maximum output
power of transmitter
[W]
0.01
0.1
1
10
For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be estimated using the
equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the
transmitter manufacturer.
Note 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
Note 2: These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and
people.
Appendix
Electromagnetic Compatibility (EMC)
Information
Table 6
the KARL STORZ NAV1™ pico system 40 8000 01
is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled.
Separation distance d [m]
according to frequency of transmitter
150 kHz to 80 MHz
80 MHz to 800 MHz
D
D
0.1
0.4
1.2
3.7
F
0.1
0.2
0.4
0.7
1.2
2.3
3.7
7.4
Werbung
Inhaltsverzeichnis
