Start Screen - ECOLAB EcoAdd Betriebsanleitung

Control/software
8.2

Start screen

Since the pump has a hardware detection feature with software that checks the devices
connected, the screen may remain visible for more than 5 seconds under certain
circumstances until the check has been completed. The screen then changes to the
operating mode (see
on page 59 ).
After switching on the pump, the following is displayed:
4
5
6
MAN046939 Rev. 6-10.2021
Ä Chapter 8.3 'Display view during ongoing operation (example)'
1
2
3
7
8
1 Manufacturer's logo
2 Pump size (litre output)
3 Specific pump key
4 Production code
5 Software versions: System/motor/Bluetooth
6 Supply voltage of the pump
7 Materials of the pump components
8 Valve material
The menu can be used to call the 'Info' screen at any time:
Ä Chapter 8.11 'Info' on page 127 .
58