Herunterladen Inhalt Inhalt Diese Seite drucken

ECOLAB EcoAdd Betriebsanleitung Seite 354

Dynamische pumpe
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Operation
DANGER!
Safety data sheets are always provided with the supplied chemicals. Before
using the chemicals, the safety data sheets must be read and understood, and
all requirements must be implemented on site. The safety data sheets should
ideally be kept directly at the workplace or attached to the containers so that
the proper countermeasures can be implemented at once in the event of an
accident.
The operator must provide the necessary personal protective equipment (PPE)
and the emergency equipment described (e.g. eye rinsing bottle). Persons
entrusted with operating the equipment must be instructed accordingly and
trained.
Download of safety data sheets
WARNING!
Risk of slipping due to fluid in the operation and provisioning area!
– Wear non-slip, chemically resistant shoes when working.
– Place product containers in a tank to prevent a slipping hazard caused by
leaking fluids.
ENVIRONMENT!
Immediately soak up any leaking liquids with a suitable binding agent and
dispose of properly.
The following screens show example displays for a pump with capacity of
11 l/h. Specifications and information shown will differ for other pump sizes.
The container change is defined in the [Configuration] / [Empty signal], depending on the
selected preset (
depending on whether 'automatic acknowledgement' (
acknowledge] preset' on page 151 ) or 'manual acknowledgement' has been (
umsteckenContainer change with preset [Man. acknowledge] preset' on page 152 )
selected.
The container change is indicated by an orange flashing empty signal indicator
represents a reserve signal. This means that an empty signal should be anticipated in
the near future and that a container should be made available now. The empty signal
itself is displayed in red. The pump stops and the empty signal is lit continuously in red. A
container change is required after the empty signal.
MAN046939 Rev. 6-10.2021
Ä Chapter 8.8.8 'Empty signal' on page 100 ). The procedure differs
150
The latest safety data sheets are available online. To
download them, go to the following link or scan the
QR code. You can then enter your required product and
download the associated safety data sheet.
https://safetydata.ecolab.eu/index.php?id=1576&L=1
Ä 'Container change with [Auto
Ä 'Räder
that

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis