ECOLAB EcoAdd Betriebsanleitung Seite 284

Control/software
[Selecting/setting Operating mode] [Pulse] [1:1]
When using pulse processing type [1:1], the pump electronics always perform a complete
metering stroke with 100% metering speed for each incoming pulse.
It is not possible to vary the metering quantity per stroke.
2
Fig. 31: [Operating mode] [Pulse] [1:1]
1.
[Call the main menu]:
2.
[Select Operating mode] - [Pulse] (item 2).
3.
[Press the Next]
ð The screen for selecting 'pulse processing' is displayed.
4.
'Select Pulse processing' [1:1] (item 4).
5.
Press the Next button
ð The screen changes to the 'Pulse memory' prompt (item 6).
6.
Select whether the 'Pulse memory' is to be used.
ð If you select the 'Pulse memory' , a
7.
Press button
ð The screen switches back to the [Operating display] (item 8) and displayed the
newly set unit.
MAN046939 Rev. 6-10.2021
3 5
4
Ä Chapter 8.5 'Main menu' on page 63
button (item 3).
(item 5).
(item 7).
80
7
6
appears in the selection box.
8