ECOLAB EcoAdd Betriebsanleitung Seite 310

Control/software
Chemical selection from an integrated database
This function is only available when a database has been loaded onto
the pump. A loaded database is shown in the operating screen using the
corresponding symbols
If you want to install a database, please contact the customer service
department at Ecolab.
If a database is installed, the dosing chemical used can be configured. Among
other things, this also influences the service intervals. The more aggressive
the chemical is in combination with the pump materials used (resistance), the
earlier the service intervals will be due.
If you select a dosing chemical from the integrated database, the pump sets
the service intervals automatically:
Ä Chapter 8.8.11 'Service interval' on page 107 .
NOTICE!
If the dosing chemical is not compatible with the pump material pairing,
the chemical name is displayed in red on the operating screen.
If no selection options are available for the pump apart from 'No details' and
'Manual' but you want to use a database, please contact the customer service
department at Ecolab. This description relates to the version with database.
8
Fig. 55: Configuration: Dosing chemical - Database selection
Factory setting: No database installed
MAN046939 Rev. 6-10.2021
.
4
3
9
106
6
5
7
11
10
12