ECOLAB EcoAdd Betriebsanleitung Seite 326

Control/software
Selecting/setting the degas function
9
10
Fig. 67: [Degas] function
1.
[Call the Main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar to scroll to the [Degas] menu item (item 3).
4.
[Select Degas ] (item 4).
ð The screen switches to the [Degas ] selection.
5.
If required, select the 'With degas' selection field (item 5).
ð The 'Degas ' selection box is marked with
6.
[Press the Next]
ð Screen switches to the settings level for the 'Pause time' .
ð The setting area for hours [hh] is shown darker (item 7) and is ready for setting.
7.
Use the slider to enter the required hours (item 8).
ð You can then set the minutes.
8.
Make the setting for the minutes [mm] (item 9).
ð The setting area is shown darker and is ready for setting
9.
Use the slider to enter the required minutes (item 10).
10. [ Press the Next]
ð Screen switches to the settings level for the 'Strokes' .
ð The setting area for is shown darker (item 12) and is ready for setting.
11. Use the slider to enter the required 'Strokes' (item 13).
ð All settings for the degas function are now complete and you can use the
button (item 14) to exit the menu.
ð All settings are saved and the display returns to the configuration overview (item
15).
12. Press the
13. Press the
MAN046939 Rev. 6-10.2021
3
4
11
12
13
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
button (item 6).
button (item 11).
button to return to the [Main menu].
button to return to the [Operating display] (item 16).
5
14
.
122
6
7
8
15
16