ECOLAB EcoAdd Betriebsanleitung Seite 240

Description of the EcoAdd
6 Description of the EcoAdd
3
11
12
10
9
A
Fig. 6: Layout 'EcoAdd'
A Layout of the EcoAdd
1 rotating control unit
2 ON/OFF button
3 USB port
4 Input display (touchscreen)
5 Nameplate
6 Mounting plate
7 Mains cable bushing / Mains connection
8 Bleed connection
9 Suction connection / suction valve
The connection is described in
on page 49 .
Permissible external cable diameters for connecting the inputs/outputs:
AD Ø = 5.1–5.7 mm (item 2–5).
Permissible cables: LIYY 4x 0.5; LIYY 5 x 0.34; LYCY 2 x 0.34; Ölflex 4 x 0.5
The protection class IP65 applies only when the specified cable is being
used.
nameplate (identification of the pump)
The pump is fitted with a nameplate ( Fig. 6 , item 5) that provides pump-specific data for
identification purposes.
The nameplate is located on the front of the pump, underneath the display, and is
Ä 'Equipment marking / nameplate' on page 190 .
explained in
MAN046939 Rev. 6-10.2021
1
4
5
8
7
2
B
6
13 14
10 Pump head
11 Pressure connection / pressure valve
12 Vent screw
B Cable bushings and connections
(behind the display cover)
13 Mains cable bushing / Mains connection
14-17 Cable bushings for connection terminals
18 T-connector for level monitoring (suction lance
connection)
Ä Chapter 7.2.2 'Electrical installation'
36
16 17 18
15