ECOLAB EcoAdd Betriebsanleitung Seite 317

8.8.13 Container size
If a value >0 is set for "Container size", the operating screen shows a container symbol
( Fig. 62 , item B) instead of the empty symbol ( Fig. 62 , item A).
The value represents the filling volume of the container used. A calculated fill level is
displayed in container based on the last container change.
If a Bluetooth PCB is installed in the pump, this feature cannot be used!
Fig. 62: Configuration [Container size]
Factory setting: No setting
[Set the Container size]:
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar to go to the [ Container size] menu item.
4.
[Select Container size].
ð The screen changes to the setting: [Container size]
5.
Use the slider to enter the quantity in litres (before the decimal point).
6.
Select the quantity in millilitres after the decimal point.
7.
Use the slider to enter the millimetres.
8.
Press the
ð The setting is saved, and the screen switches back to the configuration overview.
9.
Press the
10. Press the
ð The canister symbol ( Fig. 62 , item B) is displayed as a new fill level symbol.
4
3
A
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
button.
button to return to the [Main menu].
button to return to the [Operating display].
113
5
Control/software
8
6
7
B
MAN046939 Rev. 6-10.2021