ECOLAB EcoAdd Betriebsanleitung Seite 214

General
Advance notification of return
The return must be requested online: https://www.ecolab-
engineering.de/en/contact/returns// . Fill in all the details and follow the
further navigation.
The following documents must be completed:
– Returns form
– Request the form from Ecolab.
– Fill out the form correctly and in full.
– Fill in the clearance declaration.
– Send both in advance by fax to: (+49 8662 61-258)
– System components:
– Free of all impurities (rinsed).
– Must be dispatched in suitable plastic packaging and in a box in order to
– Cartons:
– For address see:
– The word "REPAIR" must be written on a sticker or in clear handwriting.
– Include a returns form.
1.6 Packaging
The packages are packaged according to the expected transport conditions. The
packaging is designed to protect the individual components up to assembly against
shipping damage, corrosion and other damage.
Therefore, do not destroy the packaging and only remove it just before assembly.
ENVIRONMENT!
Risk of environmental damage due to incorrect disposal!
Only environment-friendly materials were used for the packaging. Packaging
materials are valuable raw materials and can, in many cases, be used again,
be processed or recycled.
Incorrect disposal of packaging materials can be a threat to the
environment.
– Observe the locally applicable disposal regulations!
– Environmentally-friendly disposal of packaging materials.
– If necessary, hire a specialist to carry out disposal.
MAN046939 Rev. 6-10.2021
avoid any leakage of flushing water.
Ä Chapter 1.8 'Contact' on page 11
10