ECOLAB EcoAdd Betriebsanleitung Seite 300

Control/software
[Incorrect access code]
The activated [Access code] is indicated by a closed padlock symbol
display.
1
Fig. 43: Incorrect password entry
1.
When a user attempts to call the [Main menu]:
on page 63 the program displays an [Access code] prompt in the case of a closed
lock symbol.
2.
Pressing the
ð Screen changes back to the operating screen.
3.
After entering the [Access code], press the [Next button]
ð If the [Access code] is incorrect, the screen changes 'Access code incorrect!'
If the access code is correct, the screen changes back to the operating screen
4.
Select the
ð The 'Access code incorrect!' screen closes and the prompt is displayed again for
the correct [Access code].
This process can be repeated any number of times, or cancelled as described
under point 2.
What can I do if I forget the access code?
What should you do if you forget the [Access code]?
If you forget the [Access code], you can contact Ecolab Service to request a
master [Access code] with which to "unlock" the pump and set a new [Access
code].
IMPORTANT:
– Before you contact Ecolab, take note of the pump's production code (see
the rating plate or the info screen on the pump
screen' on page 58 ) and the date on which you want the pump to be
unlocked.
– The new [Access code] is valid only on this calendar day.
You must enter the [Access code] on the date that you have provided to
Ecolab.
The pump will accept the [Access code] only on this date.
MAN046939 Rev. 6-10.2021
button exits the input prompt for the [Access code].
button.
96
2
3
Ä Chapter 8.5 'Main menu'
.
Ä Chapter 8.2 'Start
on the operating
4