ECOLAB EcoAdd Betriebsanleitung Seite 339

Import file and pump have codes
During the import, the program displays a prompt asking whether the access
code should be changed.
1
6
5
11
10
Fig. 78: Import file and pump have codes
1.
Ä Further information on page 128 .
Function
ð Screen changes to [Configuration] USB export / USB import.
2.
[Select USB import ] (item 1).
ð The screen displays the configuration files located on the USB stick (item 2).
3.
Select the desired configuration file.
ð
Since the import file and the pump both contain a code, the program
displays a prompt about changing the code (item 3). If you confirm
the selection
changes to the screen for changing the import code (item 5). If you
choose the Next button
displays an information screen (item 7). You can then use the Next
button
selection, the import cannot be performed.
4.
The screen represents the import process by a rolling circle (item 9).
ð Once complete, the screen switches to a status screen (item 10).
5.
Pressing the button (item 11) restarts the pump.
ð An Info screen (item 12) with the new configuration data is shown briefly, and
then changes to the [Operating display] (item 13).
2
7
12
and press the Next button
(item 6) to confirm the change, the program
(item 8) to start the import process. If you do not confirm the
135
Control/software
8
9
(item 4), the display
MAN046939 Rev. 6-10.2021
4
3
13