ECOLAB EcoAdd Betriebsanleitung Seite 357

10.4 Confirming pump service
If an access code has been set in the pump, the pump servicing can be
performed only with the 'Administrator' access authorisation.
Symbol Description of servicing displays
No servicing required
Advance notice of a servicing
Servicing overdue
Fig. 86: Confirming pump service
1.
To confirm a pump service, press the 'Service' button (item 1) for approx. 3 seconds
on the operating screen.
2.
This step can be skipped if there is no password query here.
ð The screen switches to the query for: 'Pump service' (item 3).
3.
Pressing the Cancel button
ð The service is not reset, and the operating screen is displayed again.
4.
Pressing the OK button
the operating screen.
5.
The operating display now shows the new servicing period relevant for the material
pairing of the pump (item 6).
2
1
If you have activated the [Access code]
Ä Chapter 8.5 'Main menu' on page 63 .
(item 4), closes the information screen again.
(item 5) closes the information screen again and displays
4
5
3
, note the following:
153
Operation
6
MAN046939 Rev. 6-10.2021