ECOLAB EcoAdd Betriebsanleitung Seite 336

Control/software
Import file and pump do not have codes
In this case, the import proceeds without interim prompts.
Fig. 75: Importing and updating the configuration
1.
Function
ð Screen changes to [Configuration] USB export / USB import.
2.
[Select USB import ] (item 1).
ð The screen displays the configuration files located on the USB stick (item 2).
3.
Select the desired configuration file.
ð The screen represents the import process by a rolling circle (item 3). Once
complete, the screen switches to a status screen (item 3).
4.
Pressing the
ð The Info screen (item 5) with the new configuration is displayed for a few
seconds.
ð The screen then switches to the [Operating display] (item 6).
MAN046939 Rev. 6-10.2021
1
4
Ä Further information on page 128 .
button (item 4) restarts the pump.
2
5
132
3
6