ECOLAB EcoAdd Betriebsanleitung Seite 301

8.8.5 Unit
Select/set
Under the "Unit" menu item, you can change the unit used to display the metering quantity
from litres to gallons.
4
Fig. 44: Configuration: [Unit]
Factory setting: Litres
[Setting the Unit]:
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar on the right of the screen to scroll to [Unit].
4.
[Select Unit].
ð The screen changes to the setting: [Unit]
5.
Select 'Litres' or 'Gallons' selection box.
ð The required selection is marked.
6.
Press the
7.
Press the
8.
Press the
5
3
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
button to return to the [Configuration] menu.
button to return to the [Main menu].
button to return to the [Operating display].
97
Control/software
6
MAN046939 Rev. 6-10.2021