ECOLAB EcoAdd Betriebsanleitung Seite 308

Control/software
8.8.10 Dosing chemical
Under the "Dosing chemical" menu item, you can enter a name for the dosing chemical
that is shown in the display.
A link can also be established to an internal database of Ecolab chemicals. If you select
a chemical from this database, the chemical name is shown in the display together with a
suitable maintenance interval. In this case, the display can show whether the materials in
the pump head are suitable for this new chemical when you enter the chemical name after
changing the container.
Fig. 52: Configuration: [Dosing chemical]
Factory setting: Unspecified
The following selection options are available:
Ä 'No specification of a dosing chemical' on page 104
n
Ä 'Manual input (manual)' on page 105
n
Ä 'Chemical selection from an integrated database' on page 106
n
No specification of a dosing chemical
Fig. 53: Configuration: Dosing chemical - No details
[ Set No details]:
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar on the right of the screen to scroll to [Dosing chemical ].
4.
In the Configuration menu. select [Dosing chemical].
ð Screen switches to the dosing chemical setting.
5.
Optional: [Select No details]
6.
Press the
ð The setting is saved, and the screen switches to the configuration overview.
7.
Press the
8.
Press the
MAN046939 Rev. 6-10.2021
5
4
3
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
button.
button to return to the [Main menu].
button to return to the [Operating display].
104
6