ECOLAB EcoAdd Betriebsanleitung Seite 306

Control/software
Acknowledge manually:
The pump switches to Pause on empty signal and the empty signal symbol is displayed
in red . After pressing the red empty signal symbol, the container change must first be
approved on the screen and the suction pipe can then be moved to a new container.
Fig. 50: Acknowledge manually
[Setting Acknowledge automatically]:
1.
[Call the main menu]:
2.
[Select Configuration]:
3.
Use the scrollbar to go to the [Empty signal] menu item.
4.
[Select Empty signal].
5.
If required, select 'Empty message contact' : 'Closed contact = empty signal'
ð After selecting this, a tick mark
6.
[ Press the Next button]
ð Screen changes to the acknowledgement query of the 'empty signal' .
7.
[Select Acknowledge manually].
8.
Press the
ð The screen switches to the [Configuration] overview.
9.
Press the
10. Press the
MAN046939 Rev. 6-10.2021
3
5
4
Ä Chapter 8.5 'Main menu' on page 63
Ä Chapter 8.8 'Configuration' on page 89
.
button to save the setting.
button to return to the [Main menu].
button to return to the [Operating display].
102
6
is set in the selection field.
8
7