ECOLAB EcoAdd Betriebsanleitung Seite 348

Operation
[Changing Operating mode] [Pulse] [Quantity] at the operating level
1
Fig. 81: [Change Pulse] [Quantity] at the operating level
1.
On the screen, press the displayed 'Litre capacity/pulse' for approx. 2 seconds.
2.
This step can be skipped if there is no password query here.
ð The screen switches to the view for setting the 'Quantity' .
ð The number to the left of the decimal point is already set and can be changed.
3.
'Set the Quantity' to the left of the decimal point using the slider.
4.
Select the field for entering the value after the decimal point.
ð The background field colour changes to dark blue, which indicates that the field is
ready for input.
5.
'Set the Quantity' to the right of the decimal point using the slider.
6.
[Press the Menu button]
ð The settings are saved and the pump switches back to the operating screen.
The new 'Litre capacity/pulse' is displayed on the operating screen.
MAN046939 Rev. 6-10.2021
2
If you have activated the [access code]
Ä Chapter 8.5 'Main menu' on page 63 .
We strongly recommend setting the access code!
Ä Chapter 8.8.4 'Access code' on page 93
.
3
, note the following:
144
6
4
5