ECOLAB EcoAdd Betriebsanleitung Seite 288

Control/software
8.7.3.1 [Operating mode] [Current] [Variable]
Here, you can assign an mA value to the metering capacity = 0% and 100%. Example:
8 mA = 0% metering capacity 16 mA = 100% metering capacity
9
Fig. 34: [Operating mode] [Current] [Variable]
[Set Operating mode] - [Current]:
1.
[Call the main menu]:
2.
[Select Operating mode] [- Current].
3.
[ Press the Next button]
4.
Use the scroll bar to select the [Variable] option.
5.
Press the Next button
ð The screen changes to the current setting [Current limit 1]:
6.
'Use the slider to set mA' to the left of the decimal point.
Lower setting value + 0.2 mA = 0 % metering capacity
Upper setting value – 0.2 mA = 100 % metering capacity
7.
Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
8.
Use the slider to set the value after the decimal point.
9.
Press the Next button
ð The screen changes to the current setting [Current limit 2]:
10.
'Use the slider to set mA' to the left of the decimal point.
11. Select the field for entering the value after the decimal point.
ð The colour changes to dark blue, which indicates that the field is ready for input.
12. Use the slider to set the value after the decimal point.
13. Press the
ð Save settings, change screen: [Current].
14. Press the
15. Press the
16. Press the
MAN046939 Rev. 6-10.2021
3
2
10
8
Ä Chapter 8.5 'Main menu' on page 63
.
.
.
button.
button to return to the menu: [Operating mode].
button to return to the [Main menu].
button to return to the [Operating display].
6
4
5
11
84
7
14
12
13